LEAP programmers
For use in production environment, where robust and reliable equipment must be chosen, LEAP equipment have shown their endurance and quality. EPROM memories, microcontrollers and CPLD/ FPGA can be easily written from a computer or in stand-alone mode with the data in an internal flash. Many SMD packages can be written by using an adaptor to the ZIF socket. In-circuit programming is also possible with a custom cable.| LEAPER-3C |
 |
|
| Handy Flash memory writer. It can be connected to any PC via USB or it can work with a master memory. Functions: blank check, verify, checksum, read, erase and write. Programming algorithm, voltage and pulses are selectable. Formats: binary, intel hex, motorola hex. |
||
| PDF datasheet | ORDER | |
| LEAPER-3D |
 |
|
| Handy Flash, EPROM writer. It can be connected to any PC via USB. Functions: blank check, verify, checksum, read, erase and write. Programming algorithm, voltage and pulses are selectable. Formats: binary, intel hex, 8086 hex. |
||
| PDF datasheet | ORDER | |
| LEAPER-5E |
 |
|
| Handy MCS-51 micro programmer. (Atmel, Hyundai, Intel, Issi,
Philips, SST, Temic, Winbond). Connected to PC via USB. Functions: type, read, load, edit, erase, checksum, blank check, program, verify and protect. Formats: binary, machine, intel hex, motorola hex, tektronix. |
||
| PDF datasheet | ORDER | |
| LEAPER-9 |
 |
|
| Handy NAND Flash memory writer. Up to 1GB written in 30 seconds. IIt can be connected to any PC via USB. Functions: Pin scan, autosearch, file selection, erase, read, write, verify. Automatic pin detect and identification. Formats: binary, intel hex, 8086 hex. |
||
| PDF datasheet | ORDER | |
| LEAPER-48 |
 |
|
| Handy universal writer: EPROM, EEPROM, FLASH, NVRAM, microcontrollers, DSPs and PLDs. Connected to PC via USB. 48 pin ZIF socket. Converters available. It can program 2V5 devices. Formats: binary, JEDEC, intel hex, motorola hex, tektronix. |
||
| PDF datasheet | ORDER | |
| LEAP UDT-1 |
 |
|
|
Universal JTAG/ ISP programmer. For CPLDs and FPGAs from ALTERA, ATMEL, LATTICE and XILINX. Integrates with vendor's design software. Connects to PC via printer port. Connects to ISP/ JTAG by 6 single connectors (VS, GND, TMS, TCK, TDI, TDO) |
||
| PDF datasheet | ORDER | |
| ADAPTORS |
 |
|
| There are adaptors for PLCC, SOP, SOJ, SSOP, TSOP, PSOP, TSSOP, QFP,
TQFP, FPGA and uBGA packages. |
||